Wrightway Onsite Wastewater

About

Septic systems, certified ROWP, we design types 1 & 2, and can install types 1,2 & 3 systems.
We believe in using pressure distribution as this gives the best uniform distribution over the septic field increasing the longevity of your septic system.
Servicing Mid Vancouver Island from Parksville, Qualicum Beach and Denman & Hornby Island. We can travel for Port Albernie and the West Coast of Vancouver Island.
Contact us for remote and Northern Gulf Island Installations.
Boat Access Installations are possible.

Extra info

Images

Septic Tank Installation Sprott Lake BC Tank Installation Measuring

Crane placement of the septic tanks. This systems is a type 2 with BIONEST treatment in the middle tank.

Wastewater drip lines spaced between the trees for a discreet dispersal field. An excellent choice to keep a forested look on your property.

Here we are testing the perc rate of the soil. This helps establish how long the field will be.

This test pit ended up being 1.9 m deep. All pure sand here.

Septic Tank Installation Sprott Lake BC Tank Installation Measuring

Getting Site Ready for Tank Placement and Septic Field Installation. Fuji Clean Treatment Tank, Laser Level Cat Excavator Denman Island Remote Work B4 Engineering

Septic Tank Excavation Pea Gravel Bed Raked Level ready for tank placement

Squirt Height Test 60 cm attained. Ready for gravel fill and cover with sand 50 mm force-main from tank chamber.

Setting the sand binding layer level and flat using a laser level. Must attain +/- 1 cm left to right and along the length of the bed.

Subsurface filter built with infiltrator chambers connected to a type 2 treatment tank. When used it can help dissipate the sewer smell under ground. A cedar chip layer is placed on top to help filter the smell.

150 cm squirt height test, this ensures adequate water volume and scouring of the pipes. ROWP Standards from the SPM V 3.

Frequently Asked Questions